misconfiguration-recovery-time

Verifies connectivity after a configuration is received

Supported on the following devices:

Access Points: AP3000/X, AP5010, AP310i/e, AP410i/e, AP505i, AP510i, AP510e, AP560i, AP7602, AP7612, AP7622, AP7632, AP7662, AP8163, AP8533.
Service Platforms: NX5500, NX7500, NX9500, NX9600
Virtual Platforms: CX9000, VX9000

Syntax

misconfiguration-recovery-time [0|<60-300>]

Parameters

misconfiguration-recovery-time [0|<60-300>]


<60-300>	Sets the recovery time from 60 - 300 seconds (default is 180 seconds)
0	Disables recovery from misconfiguration

Example

NOC-NX9500(config-profile-testNX9000)#misconfiguration-recovery-time 65

NOC-NX9500(config-profile-testNX9000)#show context include-factory | include mis
configuration-recovery-time
 misconfiguration-recovery-time 65
 min-misconfiguration-recovery-time 500
NOC-NX9500(config-profile-testNX9000)#

Related Commands


no	Reverts to default (180 seconds)